ID:265028 Can't save or compile Signal Tap File -- input "<name>" of Event Counter object "<name>" must be a Boolean expression

CAUSE: You used the specified non-Boolean expression as the input of the specified Event Counter object in an Advanced Trigger Condition, but you must use a Boolean expression for the input of an Event Counter. As a result, the Quartus Prime software cannot save or compile the Signal Tap File (.stp).

ACTION: If you manually edited the STP File, restore the STP File to its original state or create a new STP File. If you used an EDA tool to generate the STP File, contact the EDA tool vendor for technical support regarding this message.