ID:19099 Can't recognize flash's device ID code <text> for device index <number>

CAUSE: You directed the Programmer to program the specified device, but the Programmer cannot recognize the flash's device ID from the device. As a result, programming was unsuccessful. A flash's device ID is a vendor's proprietary ID used to recognize the flash device. A flash's device ID is different from JTAG ID. The problem can be caused by one or more of the following conditions:

MSEL pins are not set for Active Serial (AS) configuration.
Communications cable(s) not securely connected.
Incorrect device selected.
No power to target system.
Device pins connected incorrectly.
Driving the flash interface pins with another device.
Undefined devices in the JTAG chain.

ACTION: Make sure that the MSEL pins are set for Active Serial (AS) configuration. Make sure that all cables are securely connected, select a different device, or check the power on the target system. If you are using an enhanced configuration device, make sure that the device pins are connected correctly, and that the flash interface pins of the enhanced configuration device are not being driven by another device. Enter the JTAG parameters for undefined devices.