ID:275045 Name missing for connector connecting to port "<name>" of type <name> of instance "<name>"

CAUSE: You instantiated a primitive, macrofunction, or megafunction in a Graphic Design File (.gdf) and connected a node or bus line from one of the ports of the primitive, macrofunction, or megafunction to a conduit or block. However, the node or bus line does not have a name. When you connect a conduit or block to a node or bus line, the node or bus line must have a name to specify the signal you want to divert from the connected conduit or block to the node or bus line.

ACTION: Add a name to the node or bus line to specify which signal should be diverted from the connected conduit or block to the node or bus line.