ID:176074 Can't place center fast PLL <name> and center fast PLL <name> because both center fast PLLs drive DPA channels within quadrant <name>

CAUSE: The Fitter cannot place the specified center fast PLLs because both fast PLLs drive dynamic phase alignment (DPA) channels within the specified quadrant. This message can occur, for example, due to user assignments or if the design contains too many fast PLLs in DPA mode. This message is a submessage of the message that precedes it in the Messages window and in the Messages section of the Report window.

ACTION: Modify the design to reduce the number of fast PLLs in DPA mode, modify the user assignments, or choose a larger device that has corner PLLs.