ID:176512 Can't place PLL "<name>" in location <name> -- PLL feeds the clk port of DLL "<name>" but location cannot feed the clk port of a DLL

CAUSE: The Fitter could not place the specified phase-locked loop (PLL) in the specified location because the PLL feeds the clk port of the specified delay locked loop (DLL), but the specified location to which the PLL is assigned cannot feed the clk port of a DLL.

ACTION: If you made a location assignment to the PLL, remove the location assignment or modify the assignment to allow the PLL to be placed in a location that can feed the clk port of the specified DLL.