ID:176073 Can't place fast PLL <name> -- the number of DPA channels driven by fast PLL <name>, <number>, exceeds the limit. The maximum distance between DPA channels per PLL per bank, <number>, should be satisfied so that a center PLL can drive a maximum of <number> DPA channels.

CAUSE: The Fitter cannot place the specified fast PLL because the fast PLL has more dynamic phase alignment (DPA) channels than allowed. This message is a submessage of the message that precedes it in the Messages window and in the Messages section of the Report window.

ACTION: Modify the design so that the number of DPA channels in the specified fast PLL is less than the maximum specified.