ID:170040 Can't place all RAM cells in design

CAUSE: You specified a target device for the current design, used a target device automatically chosen by the Quartus Prime software, created assignments, or assignments were automatically created by the Fitter. However, the Fitter cannot place the RAM cells in legal locations in the device because the design requires more RAM than the device contains, certain RAM assignments prevent other RAM from meeting design requirements, or different address and control lines are preventing RAM from sharing the same location.

ACTION: Select a larger device or make sure that no interaction problems occur between RAM due to assignments made to the design. Also make sure that all RAM are assigned the correct address and control signals.