ID:15994 OPERATION_MODE parameter of output phase alignment primitive "<name>" is set to either RTENA or EXTENDED_RTENA. When OPERATION_MODE is set to either RTENA or EXTENDED_RTENA, the following parameters must be set to the specified values: SYNC_MODE and ASYNC_MODE must be set to NONE, POWER_UP must be set to LOW and USE_PHASECTRL_CLOCK must be set to TRUE

CAUSE: The SYNC_MODE, ASYNC_MODE, POWER_UP, and USE_PHASECTRL_CLOCK parameters of the specified output phase alignment primitive are assigned values that are not allowed when the OPERATION_MODE parameter is set to RTENA or EXTENDED_RRENA.

ACTION: Check the design and make sure that the SYNC_MODE and ASYNC_MODE parameters are set to NONE, the POWER_UP parameter is set to LOW, and the USE_PHASECTRL_CLOCK parameter is set to TRUE when the OPERATION_MODE parameter is set to RTENA or EXTENDED_RTENA.