ID:15380 Ports <name> of DSP block multiplier WYSIWYG primitives "<name>" and "<name>" and <name> port of DSP block output WYSIWYG primitive "<name>" are not fed by the same signal source

CAUSE: The specified ports of the specified DSP block multiplier WYSIWYG primitive and the specified DSP block output WYSIWYG primitive are not fed by the same signal source. When the OPERATION_MODE is set to DYNAMIC, the specified ports must be fed by the same signal source.

ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance contact Intel Technical Support by creating a Service Request at www.altera.com/mysupport.