ID:14150 Can't recognize value <name> for EXTCLK0_COUNTER parameter in PLL "<name>" because SCAN_CHAN parameter is set to SHORT -- EXTCLK0_COUNTER parameter must be set to G0

CAUSE: The specified PLL has the specified value for the EXTCLK0_COUNTER parameter; however, Analysis & Synthesis does not recognize the EXTCLK0_COUNTER parameter value because the SCAN_CHAIN parameter is set to SHORT. A EXTCLK0_COUNTER parameter that is set to a value other than G0 is not supported for PLLs with short scan chains, because the parameter value requires an fbin port and e n (e0–e3) counters, but a PLL with a short scan chain must be placed in an enhanced PLL that does not have an fbin port and e n counters. This problem usually occurs when you instantiate a megafunction directly in a text file rather than using the MegaWizard Plug-In Manager .

ACTION: Locate the source of the message to determine which megafunction parameter is causing the error and set the EXTCLK0_COUNTER parameter to G0. To avoid receiving this message in the future, Intel recommends using the MegaWizard Plug-In Manager command to specify legal parameter values for megafunctions.