ID:14072 WYSIWYG primitive "<name>" must use pterm5 port when in XOR mode and in DFF mode, and when using the pexpout port

CAUSE: The specified WYSIWYG primitive is in XOR mode and DFF mode (that is, the OPERATION_MODE parameter is set to XOR and the REGISTER_MODE parameter is set to DFF), and uses the pexpout port, but does not use the pterm5 port. The pterm5 port must be used if the pexpout port is used and the WYSIWYG primitive is in XOR and DFF mode.

ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Intel Technical Support by creating a Service Request at www.altera.com/mysupport.