ID:176155 SERDES receiver <name> has a <number> Mbps differential I/O data rate, but the DPA must be enabled to achieve the specified data rate

CAUSE: The specified SERDES receiver is not using the dynamic phase alignment (DPA) with the specified differential I/O data rate. However, the DPA must be enabled to support the specified differential I/O data rate.

ACTION: Modify the design so that the differential I/O data rate is less than or equal to the specified maximum differential I/O data rate for non-DPA channels of the target device, or enable DPA for the specified SERDES receiver. Refer to the Package Skew Compensation report panel under Fitter report to compensate for skew.