ID:176332 Ignored Global Signal option of <name> for Clock Control Block <name> to the destination node <name> -- option must have a value of <name>

CAUSE: You assigned the Global Signal option to the outclk port of the specified Clock Control Block with the specified setting that feeds the specified destination node. However, the setting is incompatible with Clock Control Blocks that use the clkselect port. Clock Control Blocks that use the clkselect port (and the destination nodes fed by the Clock Control Block) can use only global clocks.

ACTION: No action is required. To avoid receiving this message in the future, remove or change the Global Signal option to the specified value.