ID:265030 Can't save or compile Signal Tap File -- Event Counter object "<name>" has count value of <number>, but count value must be an integer value between 1 and 2^width - 1

CAUSE: You specified a count value for the specified Event Counter object in an Advanced Trigger condition, but the value you specified is not an integer value between 1 and 2^width - 1. As a result, the Quartus Prime software cannot save or compile the Signal Tap File (.stp).

ACTION: If you manually edited the STP File, restore the STP File to its original state or create a new STP File. If you used an EDA tool to generate the STP File, contact the EDA tool vendor for technical support regarding this message.