ID:119001 Cannot select a device from device family <name> because no devices in family are installed

CAUSE: You directed the Fitter to select a target device for the current design, and specified the device family from which you want the Fitter to select the target device. However, the Fitter cannot select a device, because no devices in the family are installed. This error can also occur if you edited a Quartus Prime Settings File (.qsf) manually.

ACTION: Select another device family. If you want to select a device family for which no devices are yet installed, reinstall the Quartus Prime software to add additional device support. Make sure that the current license file supports the device family. You can find information or obtain a valid license file from the Licensing section of the Intel FPGA web site, which is available at www.altera.com/licensing.html.