get_rtl_pin_info (::quartus::rtl)
The following table displays information for the get_rtl_pin_info Tcl command:
Tcl Package and Version |
Belongs to ::quartus::rtl 1.0 |
|||
Syntax | get_rtl_pin_info [-h | -help] [-long_help] [-full_name] [-is_gnd] [-is_in_pin] [-is_inverted] [-is_out_pin] [-is_vcc] [-name] [-parent_cell] [-type] <pin_object> | |||
Arguments | -h | -help | Short help | ||
-long_help | Long help with examples and possible return values | |||
-full_name | Return the pin name | |||
-is_gnd | Return true if it is connected to GND, or false otherwise | |||
-is_in_pin | Return true if it is an input pin, or false otherwise | |||
-is_inverted | Return true if the pin is inverted, or false otherwise | |||
-is_out_pin | Return true if it is an output pin, or false otherwise | |||
-is_vcc | Return true if it is connected to VCC, or false otherwise | |||
-name | Return the pin name | |||
-parent_cell | Return the parent cell ID | |||
-type | Return the pin type | |||
<pin_object> | Pin object | |||
Description |
Gets information about the specified pin (referenced by pin ID). Pin ID's can be obtained by Tcl commands such as get_pins. The -name option returns the name of the pin. The pin names are displayed in the following format: <cell name>|<pin name>. The -type option returns "input" or "output" based on the pin type. Options -name, -type, -parent_cell, -is_clock, -is_in_pin and -is_out_pin are mutually exclusive. |
|||
Example Usage |
project_open chiptrip load_rtl_netlist set pins [get_rtl_pins] foreach_in_collection pin $pins { set pin_name [get_rtl_pin_info $pin -name] set parent_cell [get_rtl_pin_info $pin -parent_cell] set parent_name [get_rtl_cell_info -name $parent_cell] puts "Pin $pin_name belongs to cell $parent_name" } unload_rtl_netlist project_close |
|||
Return Value | Code Name | Code | String Return | |
TCL_OK | 0 | INFO: Operation successful | ||
TCL_ERROR | 1 | ERROR: Can't read compiler database. Run the Analysis and Synthesis (quartus_map) successfully before using this command. | ||
TCL_ERROR | 1 | ERROR: You must open a project before you can use this command. | ||
TCL_ERROR | 1 | ERROR: sgate netlist does not exist. Use load_rtl_netlist to create the sgate netlist. | ||
TCL_ERROR | 1 | ERROR: Cannot find object of ID <string>. Specify an existing object ID. |