end_insystem_source_probe (::quartus::insystem_source_probe)
The following table displays information for the end_insystem_source_probe Tcl command:
Tcl Package and Version |
Belongs to ::quartus::insystem_source_probe 1.0 |
||
Syntax | end_insystem_source_probe [-h | -help] [-long_help] | ||
Arguments | -h | -help | Short help | |
-long_help | Long help with examples and possible return values | ||
Description |
This command releases the JTAG chain. Use when finished performing In-System Sources and Probes transactions. |
||
Example Usage |
#List probe data of instance 0 start_insystem_source_probe -hardware_name "USB-Blaster \[USB-0\]" -device_name "@1: EP1S25/_HARDCOPY_FPGA_PROTOTYPE (0x020030DD)" puts "probe data of instance 0" puts [read_probe_data -instance_index 0] end_insystem_source_probe |
||
Return Value | Code Name | Code | String Return |
TCL_OK | 0 | INFO: Operation successful | |
TCL_ERROR | 1 | ERROR: The specified device is not found. | |
TCL_ERROR | 1 | ERROR: The specified hardware is not found. | |
TCL_ERROR | 1 | ERROR: An internal Tcl interpreter error occurred. | |
TCL_ERROR | 1 | ERROR: No In-System Sources and Probes instance was found. | |
TCL_ERROR | 1 | ERROR: The In-System Sources and Probes instance was not started. This command cannot be used unless the In-System Sources and Probes trasaction is started. |