Add Partition Dialog Box

To open in the Programming File Generator, click the Configuration Device tab, select a device from the list, and click Add Partition.

Allows you to specify the attributes of a new partition.

Parameter Description
Name Name that you give to the partition
Input File Input file to program into the flash partition
Page Indicates that the partition stores bitstreams for configuration.

If the device has the remote system update feature enabled, Page represents the parity.

Address Mode The options are:
Option Description
Auto The tool automatically allocates a block in the flash device to store the data.
Block You specify the start and end address of the flash partition.
Start You only specify the start address of the partition. The tool assigns the end address of the partition based on the input data size.
Start Address Specifies the start address of the partition. Only enabled when Address Mode is Block or Start.
End Address Specifies the end address of the partition. Only enabled when Address Mode is Block.