set_location_assignment (::quartus::project)

The following table displays information for the set_location_assignment Tcl command:

Tcl Package and Version

Belongs to ::quartus::project 2.0

Syntax set_location_assignment [-h | -help] [-long_help] [-comment <comment> ] [-disable] [-remove] -to <destination>
 
[ <value> ]
Arguments -h | -help Short help
-long_help Long help with examples and possible return values
-comment <comment> Comment
-disable Option to disable assignment
-remove Option to remove assignment
-to <destination> Destination of assignment
<value> Assignment value
Description
Sets or removes a location assignment.

                Valid location assignments, and settings for those
                assignments for your design are determined by the
                target device, package type, and pin count.

                To explore possible assignments and settings for your
                design and device, in the Quartus Prime Assignment
                Editor, specify Location for Assignment Name, and then
                click Browse in the Value column. In the Location
                dialog box, explore assignable device resources in the
                Element list, and then use the lists that appear
                (based on the element selected) to determine locations
                of resources that can be specified as the value for
                the assignment.

Assignments created or modified by using this Tcl
command are not saved to the Quartus Prime Settings File
(.qsf) unless you explicitly call one of the following
two Tcl commands:

1) export_assignments

                2) project_close (unless "-dont_export_assignments" is
                specified)

These two Tcl commands reside in the
::quartus::project Tcl package. You must save
assignment changes before you run Quartus Prime
command-line executables. Note, however, that the Tcl
commands "execute_flow" and "execute_module" (part of
the ::quartus::flow Tcl package) automatically call
"export_assignments" before they run command-line
executables.
Example Usage
set_location_assignment -to dst LOC
Return Value Code Name Code String Return
TCL_OK 0 INFO: Operation successful
TCL_ERROR 1 ERROR: Can't find active revision name. Make sure there is an open, active revision name.
TCL_ERROR 1 ERROR: The assignment <string> is from Design Template and can't be changed/removed.
TCL_ERROR 1 ERROR: Value <string> for <string> assignment is illegal. Specify a legal value.
TCL_ERROR 1 ERROR: Missing destination for assignment. Specify the destination for the assignment.
TCL_ERROR 1 ERROR: You must open a project before you can use this command.
TCL_ERROR 1 ERROR: Missing <<string>> for <string> assignment. Specify the required <string>.