Enable Fine Delay Resolution on T11 Delay (DQS Post-Amble Delay) logic option

A logic option that turns on fine delay resolution for the T11 delay cell. This is an advanced option; use this option only after compiling your project, checking I/O timing, and determining that timing is unsatisfactory. This option is ignored if it is applied to anything other than an input or bidirectional pin.

This option is available for all Intel devices supported by the Intel® Quartus® Prime software.

Scripting Information

Keyword: t11_fine_delay



For more information, refer to the data sheet for the relevant device family, which is available from the Literature section of the Altera website.