set_min_delay (::quartus::sdc)

The following table displays information for the set_min_delay Tcl command:

Tcl Package and Version

Belongs to ::quartus::sdc 1.5

Syntax set_min_delay [-h | -help] [-long_help] [-fall_from <names> ] [-fall_to <names> ] [-from <names> ] [-rise_from <names> ] [-rise_to <names> ] [-through <names> ] [-to <names> ]
 
<value>
Arguments -h | -help Short help
-long_help Long help with examples and possible return values
-fall_from <names> Valid source clocks (string patterns are matched using Tcl string matching)
-fall_to <names> Valid destination clocks (string patterns are matched using Tcl string matching)
-from <names> Valid sources (string patterns are matched using Tcl string matching)
-rise_from <names> Valid source clocks (string patterns are matched using Tcl string matching)
-rise_to <names> Valid destination clocks (string patterns are matched using Tcl string matching)
-through <names> Valid through nodes (string patterns are matched using Tcl string matching)
-to <names> Valid destinations (string patterns are matched using Tcl string matching)
<value> Time Value
Description
Specifies a minimum delay exception for a given path.

The minimum delay is similar to changing the hold relationship
(launching clock edge - latching clock edge), except that it can be
applied to input or output ports without input or output delays
assigned to them. Minimum delays are always relative to any clock
network delays (if the source or destination is register) or any input
or output delays (if the source or destination is a port). Therefore,
input delays and clock latencies are added to the data arrival times.
Clock latencies also added to data required times and output delays
are subtracted from data required times.

The -from and -to values are collections of clocks, registers, ports, 
pins, or cells in the design. If the -from or -to values are not 
specified, the collection is converted automatically into
[get_keepers *]. It is worth noting that if the counterpart of the
unspecified collection is a clock collection, it is more efficient 
to explicitly specify this collection as a clock collection, but only 
if the clock collection also generates the desired assignment.

Applying exceptions between clocks applies the exception from all 
register or ports driven by the -from clock to all registers or 
ports driven by the -to clock. Also, applying exceptions between 
a pair of clocks is more efficient than for specific node to node or
node to clock paths.

If pin names or collections are used, the -from value must be a
clock pin and the -to value must be any non-clock input pin to 
a register. Assignments from clock pins or to and from cells applies 
to all registers in the cell or driven by the clock pin.

The -through values are collections of pins or nets in the 
design. An exception applied through a node in the design applies 
only to paths through the specified node.
TimeQuest allows you to specify the -through argument multiple times to
describe paths that go through multiple points. 
For instance, users can select all paths that go through node X, and then go through node Y. 
This helps you narrow down and select the specific paths that you are interested in.

The -rise_from and -fall_from options can be used in place of the
destination nodes specified using the -from option. The rise or fall
value of the option indicates that the "from" nodes are driven by the
rising or falling edge of the clock that feeds this node taking into
consideration any logical inversions along the clock path.  The -from
option is the combination of both rising and falling "from" nodes.  If
the -from collection is a clock collection, the assignment applies to
those nodes that are driven by the respective rising or falling clock
edge.

The -rise_to and -fall_to options behave similarly to the "from"
options described previously.  These assignments restrict the given
assignment to only those nodes or clocks that correspond to the
specified rise or fall value taking into consideration any logical
inversions that are along the clock path.

The values of the -from, -to, -through, and other similar options are
either collections or a Tcl list of wildcards used to create
collections of appropriate types. The values used must follow standard
Tcl or TimeQuest-extension substitution rules.  See help for the
use_timequest_style_escaping command for details.  
Example Usage
# Apply a 0ns min delay between two unrelated clocks
set_min_delay -from [get_clocks clkA] -to [get_clocks clkB] 0.000

# Apply a 0ns min delay for an input port (TH)
set_min_delay -from [get_ports in[*]] -to [get_registers *] -.000

# Apply a 0.5ns min delay for an output port (MIN_TCO)
set_min_delay -from [get_registers *] -to [get_ports out[*]] 0.500

# Apply a 0.5ns min delay for an input port to an output port (MIN_TPD)
set_min_delay -from [get_ports in[*]] -to [get_ports out[*]] 0.500

# Apply a 0.5ns min delay for an input port only to nodes driven by 
# the falling edge of clock CLK
set_max_delay -from [get_ports in[*]] -fall_to [get_clocks CLK] 0.500
Return Value Code Name Code String Return
TCL_OK 0 INFO: Operation successful