rtm_retime (::quartus::rtm)
The following table displays information for the rtm_retime Tcl command:
Tcl Package and Version |
Belongs to ::quartus::rtm 1.0 |
||
Syntax | rtm_retime [-h | -help] [-long_help] | ||
Arguments | -h | -help | Short help | |
-long_help | Long help with examples and possible return values | ||
Description |
Invoke retimer. |
||
Example Usage |
This command currently contains no example usage. |
||
Return Value | Code Name | Code | String Return |
TCL_OK | 0 | INFO: Operation successful | |
TCL_ERROR | 1 | ERROR: Fitter Hyper-Retiming optimizations are disabled. Enable retiming optimizations by turning on 'Allow Register Retiming' and re-run the Quartus Fitter to fully take advantage of the HyperFlex architecture. | |
TCL_ERROR | 1 | ERROR: Can't find active revision. Make sure there is an open, active revision name. | |
TCL_ERROR | 1 | ERROR: Fitter (quartus_fit) failed or was not run. Run the Fitter (quartus_fit) successfully before running the Hyper-Retimer | |
TCL_ERROR | 1 | ERROR: Timing netlist does not exist. Use create_timing_netlist to create a timing netlist. | |
TCL_ERROR | 1 | ERROR: The --retime option is no longer supported in TimeQuest for Quartus Prime Pro Edition. To run the Hyper-Retimer, please run quartus_fit --retime. | |
TCL_ERROR | 1 | ERROR: To run the Hyper-Retimer, please use Quartus Prime Pro Edition and run quartus_fit --retime. | |
TCL_ERROR | 1 | ERROR: Failed to successfully retime netlist. | |
TCL_ERROR | 1 | ERROR: The Hyper-Retimer is not supported for device <string>. | |
TCL_ERROR | 1 | ERROR: The command is only supported within the Fitter (quartus_fit) |