get_path_info (::quartus::sta)
The following table displays information for the get_path_info
Tcl command:
Tcl Package and Version |
Belongs to ::quartus::sta 1.0 |
|||
Syntax |
get_path_info [-h | -help] [-long_help]
[-advanced]
[-arrival_points]
[-arrival_time]
[-clock_relationship]
[-clock_skew]
[-data_delay]
[-from]
[-from_clock]
[-from_clock_is_inverted]
[-hold_end_multicycle]
[-hold_start_multicycle]
[-latch_time]
[-launch_time]
[-num_logic_levels]
[-required_points]
[-required_time]
[-setup_end_multicycle]
[-setup_start_multicycle]
[-slack]
[-to]
[-to_clock]
[-to_clock_is_inverted]
[-type]
<path_ref>
|
|||
Arguments |
-h | -help
|
Short help | ||
-long_help
|
Long help with examples and possible return values | |||
-advanced
|
Return clock pessimism due to advanced effects | |||
-arrival_points
|
Return a collection of point objects for the arrival path | |||
-arrival_time
|
Return the data arrival time for the path | |||
-clock_relationship
|
Return the clock relationship for the path | |||
-clock_skew
|
Return the clock skew for the path | |||
-data_delay
|
Return the data delay for the path | |||
-from
|
Return the source node ID | |||
-from_clock
|
Return the source clock ID | |||
-from_clock_is_inverted
|
Return 1 if the source clock is inverted, 0 otherwise | |||
-hold_end_multicycle
|
Return the hold end multicycle for the path | |||
-hold_start_multicycle
|
Return the hold start multicycle for the path | |||
-latch_time
|
Return the latch time for the path | |||
-launch_time
|
Return the launch time for the path | |||
-num_logic_levels
|
Return the number of logic levels on the path between the to node and from node | |||
-required_points
|
Return a collection of point objects for the required path | |||
-required_time
|
Return the data required time for the path | |||
-setup_end_multicycle
|
Return the setup end multicycle for the path | |||
-setup_start_multicycle
|
Return the setup start multicycle for the path | |||
-slack
|
Return the slack for the path | |||
-to
|
Return the destination node ID | |||
-to_clock
|
Return the destination clock ID | |||
-to_clock_is_inverted
|
Return 1 if the destination clock is inverted, 0 otherwise | |||
-type
|
Return the type of this path. Possible return values are: "setup", "hold", "recovery", "removal", "max_path", "min_path" | |||
<path_ref> | Path object | |||
Description |
|
|||
Example Usage |
|
|||
Return Value | Code Name | Code | String Return | |
TCL_OK | 0 | INFO: Operation successful | ||
TCL_ERROR | 1 | ERROR: Object with ID <string> is not an object of type <string>. Specify the ID of an object with the correct type. |