get_rtl_cell_info (::quartus::rtl)

The following table displays information for the get_rtl_cell_info Tcl command:

Tcl Package and Version

Belongs to ::quartus::rtl 1.0

Syntax get_rtl_cell_info [-h | -help] [-long_help] [-in_pins] [-name] [-out_pins] [-pins] [-type]
Arguments -h | -help Short help
-long_help Long help with examples and possible return values
-in_pins Return a collection of input pin IDs
-name Return the cell name
-out_pins Return a collection of output pin IDs
-pins Return a collection of input and output pin IDs
-type Return the cell type
<cell_object> Cell Object
Gets information about the specified cell (referenced by cell ID).
You can obtain cell using the get_cells Tcl command.

Options "-name", "-type", "-pins", "-in_pins" and "-out_pins"
are mutually exclusive.
Example Usage
project_open chiptrip
set cells [get_rtl_cells]
foreach_in_collection cell $cells {
	set cell_name [get_rtl_cell_info $cell -name]
	set cell_type [get_rtl_cell_info $cell -type]
    puts "$cell_name: $cell_type "
Return Value Code Name Code String Return
TCL_OK 0 INFO: Operation successful
TCL_ERROR 1 ERROR: Can't read compiler database. Run the Analysis and Synthesis (quartus_map) successfully before using this command.
TCL_ERROR 1 ERROR: You must open a project before you can use this command.
TCL_ERROR 1 ERROR: sgate netlist does not exist. Use load_rtl_netlist to create the sgate netlist.
TCL_ERROR 1 ERROR: Cannot find object of ID <string>. Specify an existing object ID.