get_current_state_of_output_pin (::quartus::logic_analyzer_interface)
The following table displays information for the get_current_state_of_output_pin
Tcl command:
Tcl Package and Version |
Belongs to ::quartus::logic_analyzer_interface 1.0 |
|||
Syntax |
get_current_state_of_output_pin [-h | -help] [-long_help]
-instance_name
<instance name>
|
|||
Arguments |
-h | -help
|
Short help | ||
-long_help
|
Long help with examples and possible return values | |||
-instance_name
<instance name>
|
Name of the Logic Analyzer Interface instance to change | |||
Description |
|
|||
Example Usage |
|
|||
Return Value | Code Name | Code | String Return | |
TCL_OK | 0 | INFO: Operation successful | ||
TCL_ERROR | 1 | ERROR: No Logic Analyzer Interface control sequence has been started. | ||
TCL_ERROR | 1 | ERROR: The specified device is not found. | ||
TCL_ERROR | 1 | ERROR: The specified hardware is not found. | ||
TCL_ERROR | 1 | ERROR: The specified Logic Analyzer Interface instance in the file is not compatible with the instance in the device. | ||
TCL_ERROR | 1 | ERROR: JTAG communication error is detected. It can be caused by the hardware failure or poor signal integrity in the JTAG chain. | ||
TCL_ERROR | 1 | ERROR: The specified Logic Analyzer Interface instance cannot be found. | ||
TCL_ERROR | 1 | ERROR: The version of the specified Logic Analyzer Interface instance is not supported in this release of software. |