start_insystem_source_probe (::quartus::insystem_source_probe)
The following table displays information for the start_insystem_source_probe
Tcl command:
Tcl Package and Version |
Belongs to ::quartus::insystem_source_probe 1.0 |
|||
Syntax |
start_insystem_source_probe [-h | -help] [-long_help]
-device_name
<device name>
-hardware_name
<hardware name>
|
|||
Arguments |
-h | -help
|
Short help | ||
-long_help
|
Long help with examples and possible return values | |||
-device_name
<device name>
|
Name of the device that holds the In-System Sources and Probes instances | |||
-hardware_name
<hardware name>
|
Name of programming hardware connected to the JTAG chain | |||
Description |
|
|||
Example Usage |
|
|||
Return Value | Code Name | Code | String Return | |
TCL_OK | 0 | INFO: Operation successful | ||
TCL_ERROR | 1 | ERROR: The specified device is not found. | ||
TCL_ERROR | 1 | ERROR: The specified hardware is not found. | ||
TCL_ERROR | 1 | ERROR: An internal Tcl interpreter error occurred. | ||
TCL_ERROR | 1 | ERROR: JTAG communication error detected. Errors can be caused by hardware failure or poor signal integrity in the JTAG chain. | ||
TCL_ERROR | 1 | ERROR: No In-System Sources and Probes instance was found. | ||
TCL_ERROR | 1 | ERROR: There is already an active In-System Sources and Probes session started. Unable to start another session. | ||
TCL_ERROR | 1 | ERROR: The device is locked by another application. |