initialize_connections (::quartus::external_memif_toolkit)
The following table displays information for the initialize_connections
Tcl command:
Tcl Package and Version |
Belongs to ::quartus::external_memif_toolkit 1.0 |
||
Syntax |
initialize_connections [-h | -help] [-long_help]
|
||
Arguments |
-h | -help
|
Short help | |
-long_help
|
Long help with examples and possible return values | ||
Description |
|
||
Example Usage |
|
||
Return Value | Code Name | Code | String Return |
TCL_OK | 0 | INFO: Operation successful | |
TCL_ERROR | 1 | ERROR: Unable to find active revision. Specify an active revision name using set_current_revision <revision name>. | |
TCL_ERROR | 1 | ERROR: The current project specifies a part that cannot be loaded. Verify the device family is correctly installed. | |
TCL_ERROR | 1 | ERROR: The connection to the hardware drivers could not be established. | |
TCL_ERROR | 1 | ERROR: Illegal connections detected | |
TCL_ERROR | 1 | ERROR: The current project settings are invalid. Verify that all project settings are valid. | |
TCL_ERROR | 1 | ERROR: The JTAG Debug Information (.jdi) file called <string> could not be found. Ensure this file exists or run quartus_asm to create it. | |
TCL_ERROR | 1 | ERROR: You must open a project before you can use this command. | |
TCL_ERROR | 1 | ERROR: Could not initialize System Console. <string> | |
TCL_ERROR | 1 | ERROR: Toolkit has already been initialized. Use terminate_connections to de-initialize the toolkit. |