read_netlist (::quartus::chip_planner)
The following table displays information for the read_netlist
Tcl command:
Tcl Package and Version |
Belongs to ::quartus::chip_planner 2.0 |
|||
Syntax |
read_netlist [-h | -help] [-long_help]
[-force_post
<pass|fail>
]
|
|||
Arguments |
-h | -help
|
Short help | ||
-long_help
|
Long help with examples and possible return values | |||
-force_post
<pass|fail>
|
Force cleanup procedures to run after a fit if -force was used | |||
Description |
|
|||
Example Usage |
|
|||
Return Value | Code Name | Code | String Return | |
TCL_OK | 0 | INFO: Operation successful | ||
TCL_ERROR | 1 | ERROR: Unable to create Chip Planner netlist. Current device family does not support the Chip Planner. Specify another device family and recompile the design. | ||
TCL_ERROR | 1 | ERROR: Chip Planner (::quartus::chip_planner) is not available from the Quartus Prime Tcl Console. Run the quartus_cdb executable with commands from the ::quartus::chip_planner package from a system command prompt. | ||
TCL_ERROR | 1 | ERROR: Chip Planner is unavailable with the current license. Refer to the Licensing section of the Intel website to obtain a valid Quartus Prime license file. | ||
TCL_ERROR | 1 | ERROR: Unable to find an active revision. Make sure there is an open, active revision. | ||
TCL_ERROR | 1 | ERROR: No open project. Open an existing project or create a new project. | ||
TCL_ERROR | 1 | ERROR: Before running Chip Planner, run Analysis &Synthesis (quartus_map) for read-only use and quartus_fit to enable writable ECO changes. |