ID:287002 Group MSB <name> <number> overrides BIT0 = LSB in actual or default Options Statement
CAUSE: In a group range in a Text Design File (.tdf), you specified bits in ascending order. The first bit shown in the group range is always the MSB of the group, regardless of the setting in the Options Statement in the TDF. Therefore, the specified lowest numbered bit in the group is the MSB, even though one of the following conditions exists:
- In the Options Statement in the TDF, you used the
BIT0
optionBIT0 = LSB
, which specifies the lowest numbered bit in the group as the LSB. - You did not use an Options Statement in the TDF. In this situation, Analysis & Synthesis treats the TDF as if it contains an Options Statement with the
BIT0
optionBIT0 = LSB
.
ACTION: If you want the lowest numbered bit in the group to be the LSB, specify the bits in the group range in descending order. If you want the lowest numbered bit in the group to be the MSB and you want to avoid receiving this message in the future, perform one of the following actions:
- Change the
LSB
setting in the existing Options Statement toMSB
orANY
. - Add an Options Statement that contains
BIT0 = MSB
orBIT0 = ANY
to the TDF.