ID:15044 PLL "<name>" has SWITCH_OVER_TYPE parameter set to MANUAL, but clkswitch port is not connected
CAUSE: The specified PLL has the SWITCH_OVER_TYPE
parameter set to MANUAL
, but the clkswitch
port is not connected. As a result, the PLL will not switch between the input clocks and will only be fed by inclk0
port.
ACTION: If you want the PLL to not switch between the input clocks and fed only by inclk0
port, no action is required. Otherwise, connect the clkswitch
port, or disconnect the unused inclk1
port.