ID:15495 Ignored enable1 port of LVDS receiver "<name>" because USE_ENABLE1 is set to OFF
CAUSE: You specified the USE_ENABLE1
parameter of the specified LVDS receiver to OFF
. As a result, the Quartus Prime software ignored the enable1
port of the LVDS receiver. This warning usually occurs when you instantiate a megafunction directly in a text file rather than using the
MegaWizard Plug-In Manager
.
ACTION: If you do not want the Quartus Prime software to ignore the enable1
port of the LVDS receiver, specify the USE_ENABLE1
parameter to ON
or remove the enable1
port. Otherwise, no action is required.