ID:14137 Ignored <name> parameter in PLL "<name>" because counter is set to bypass mode
CAUSE: The specified PLL has the specified parameter, but the parameter is not supported when the counter is set to bypass mode (that is, the <counter name>
_MODE
parameter is set to BYPASS
). Analysis & Synthesis is ignoring the specified parameter. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the
MegaWizard Plug-In Manager
.
ACTION: No action is necessary. To avoid receiving this message in the future, remove the parameter or set the <counter name>
_MODE
parameter to ODD
or EVEN
. Intel recommends using the MegaWizard Plug-In Manager command to specify legal ports and parameter values for megafunctions.