ID:186400 Preserved the DQS Delay setting (CRAM setting) from Quartus II software version 3.0 for DQS I/O pin "<name>"
CAUSE: You set the FYGR_TORNADO_USE_OLD_DQS_DELAY
variable to ON
in the
quartus.ini
file so that the Quartus Prime software uses the DQS Delay setting from Quartus Prime software version 3.0 for the specified DQS I/O pin.
ACTION: No action is required. If you require a different setting, remove the FYGR_TORNADO_USE_OLD_DQS_DELAY
variable or set the value to OFF
in the quartus.ini file.