ID:13373 Verilog HDL Gate Instantiation error at <location>: multiple terminals on pull-up or pull-down sources are not supported
CAUSE: In a Gate Instantiation at the specified location in a Verilog Design File (.v), you specify a pullup
or pulldown
source that drives more than one net in its terminal list. Although Verilog HDL supports pullup
and pulldown
sources driving multiple nets, the Quartus Prime software allows pullup
and pulldown
sources to drive only one net.
ACTION: Rewrite the design to include a separate
pullup
or pulldown
source for each net that you wish to drive. For example, if you are using the following syntax:pullup my_pullup (a, b, c, d);
you should replace it with the following syntax:pullup my_pullup1 (a);
pullup my_pullup2 (b);
pullup my_pullup3 (c);
pullup my_pullup4 (d);