ID:287034 Pin "<name>" defined in Subdesign Section as input, machine input, or machine output pin cannot be defined in Register Declaration
CAUSE: In a Register Declaration in a Text Design File (.tdf), you defined the specified pin as a register. However, in the TDF's Subdesign Section, you defined the pin with the port type INPUT
, MACHINE INPUT
, or MACHINE OUTPUT
. You can define only output or bidirectional pins (that is, pins you define with the port type OUTPUT
or BIDIR
in the Subdesign Section) as registers.
ACTION: Define the pin as an output or bidirectional pin in the Subdesign Section, or remove the Register Declaration where you define the pin as a register.