ID:186275 Can't place enhanced PLL "<name>" in PLL location <name> because PLL has different parameters for C0 and E0 counters
CAUSE: You used the
MegaWizard Plug-In Manager
to assign different parameters to C0
and E0
counters of the specified enhanced PLL. However, the Fitter cannot place the specified PLL because the PLL location requires that C0
and E0
counters have identical parameters.
ACTION: Use the MegaWizard Plug-In Manager to modify the design so that the specified PLL has identical parameters for C0
and E0
counters, or assign the specified PLL to a different PLL location.