ID:186175 Can't place cruclk signal "<name>" at pin <name> because pin location is not in same quad as GXB receiver channels fed by cruclk signal -- cruclk calibration and GXB receiver channel band-gap circuits will not function properly
CAUSE: The Fitter cannot place the specified cruclk
signal at the specified pin location because the pin location is in a different channels fed by the specified cruclk
signal. If the cruclk
signal is placed in this quad, the cruclk
calibration and GXB receiver channel band-gap circuits will not function properly.
ACTION: Assign the cruclk
signal to a pin location that is in the same quad as the GXB receiver channels fed by the cruclk
signal.