ID:15038 PLL "<name>" uses automatic switchover features, but SWITCH_OVER_TYPE parameter is set to MANUAL
CAUSE: The specified PLL uses automatic switchover features, such as the clkbad[]
, activeclk
, or clkloss
ports, or the switchover on loss-of-clock feature was selected, but the SWITCH_OVER_TYPE
parameter is set to MANUAL
. When the SWITCH_OVER_TYPE
parameter is set to MANUAL
, the PLL cannot use automatic switchover features.
ACTION: Change the SWITCH_OVER_TYPE
parameter of the specified PLL to AUTO
, or do not use automatic switchover features with the SWITCH_OVER_TYPE
parameter set to MANUAL
.