ID:130000 The <name> primitive "<name>" has parameter "<name>"="<number>", which is incompatible with <name> primitive "<name>"
CAUSE: Connecting the phasectrl
input port of a CLK_PHASE_SELECT
primitive to a specific DQS_CONFIG
output port implies the use of a specific type of CLK_PHASE_SELECT
multiplexer in the FPGA. To use this multiplexer, the LEVELING_DELAY_CHAIN
primitive that drives the clkin
input port of the CLK_PHASE_SELECT
primitive must have the correct value for its physical_clock_source
parameter.
ACTION: Check the configuration of the CLK_PHASE_SELECT
primitive. The phasectrl
input port may be connected to the wrong DQS_CONFIG
output port, or the clkin
port of the CLK_PHASE_SELECT
primitive may need to be connected to a LEVELING_DELAY_CHAIN
primitive with the correct value for the physical_clock_source
parameter. See the sub-messages for the name of the DQS_CONFIG
port that drives clkin
input as well as the expected value of the LEVELING_DELAY_CHAIN
primitive's physical_clock_source
in this configuration.