ID:15514 enable1 output port of fast PLL "<name>" must feed only the enable1 input port of a SERDES receiver or the enable0 input port of a SERDES transmitter
CAUSE: You specified the enable1
output port of the specified fast PLL. However, the enable1
output port must feed only the enable1
input port of a SERDES receiver or the enable0
input port of a SERDES transmitter. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the
MegaWizard Plug-In Manager
.
ACTION: Modify the design so that the enable1
output port of the specified fast PLL feeds only the enable1
input port of a SERDES receiver or the enable0
input port of a SERDES transmitter.