ID:15994 OPERATION_MODE parameter of output phase alignment primitive "<name>" is set to either RTENA or EXTENDED_RTENA. When OPERATION_MODE is set to either RTENA or EXTENDED_RTENA, the following parameters must be set to the specified values: SYNC_MODE and ASYNC_MODE must be set to NONE, POWER_UP must be set to LOW and USE_PHASECTRL_CLOCK must be set to TRUE
CAUSE: The SYNC_MODE
, ASYNC_MODE
, POWER_UP
, and USE_PHASECTRL_CLOCK
parameters of the specified output phase alignment primitive are assigned values that are not allowed when the OPERATION_MODE
parameter is set to RTENA
or EXTENDED_RRENA
.
ACTION: Check the design and make sure that the SYNC_MODE
and ASYNC_MODE
parameters are set to NONE
, the POWER_UP
parameter is set to LOW
, and the USE_PHASECTRL_CLOCK
parameter is set to TRUE
when the OPERATION_MODE
parameter is set to RTENA
or EXTENDED_RTENA
.