ID:15292 LCELL atom "<name>" must use clk port when in synchronous mode
CAUSE: The specified LCELL atom is in synchronous mode (that is, either the sload
port is connected, or the sclr
port is connected), but it does not use the clk
port. The clk
port must be used in synchronous mode. Either the clk
port must be connected, or the sload
port and the sclr
port must be disconnected.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance contact Intel Technical Support by creating a Service Request at www.altera.com/mysupport.