ID:14143 PLL "<name>" must use <fbin port or FEEDBACK_SOURCE parameter> because it is in EXTERNAL_FEEDBACK mode
CAUSE: The specified PLL does not use the fbin
port or FEEDBACK_SOURCE
parameter. The fbin
port must be used or the FEEDBACK_SOURCE
parameter must be specified because the OPERATION_MODE
parameter is set to EXTERNAL_FEEDBACK
. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the
MegaWizard Plug-In Manager
.
ACTION: Locate the source of the message to determine which megafunction parameter is causing the error, and either add the fbin
port and specify the FEEDBACK_SOURCE
parameter or set the OPERATION_MODE
parameter to a value other than EXTERNAL_FEEDBACK
. To avoid receiving this message in the future, Intel recommends using the MegaWizard Plug-In Manager command to specify legal ports and parameter values for megafunctions.