ID:14152 PLL "<name>" must have OPERATION_MODE parameter set to NORMAL when PLL_TYPE parameter is set to CDR
CAUSE: The specified PLL has the PLL_TYPE
parameter set to CDR
, but has the OPERATION_MODE
parameter set to a value other than NORMAL
. The OPERATION_MODE
parameter must be set to NORMAL
if the PLL_TYPE
parameter is set to CDR
. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the
MegaWizard Plug-In Manager
.
ACTION: Change the OPERATION_MODE
parameter to NORMAL
, or change the PLL_TYPE
parameter to a value other than CDR
. To avoid receiving this message in the future, Intel recommends using the MegaWizard Plug-In Manager to specify legal parameter values for megafunctions.