ID:14153 PLL "<name>" must have BANDWIDTH_TYPE parameter set to LOW or HIGH when PLL_TYPE parameter is set to CDR
CAUSE: The specified PLL has the PLL_TYPE
parameter set to CDR
, but has the BANDWIDTH_TYPE
parameter set to a value other than LOW
or HIGH
. The BANDWIDTH_TYPE
parameter must be set to LOW
or HIGH
when the PLL_TYPE
parameter is set to CDR
. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the
MegaWizard Plug-In Manager
.
ACTION: Change the BANDWIDTH_TYPE
parameter to LOW
or HIGH
, or change the PLL_TYPE
parameter to a value other than CDR
. To avoid receiving this message in the future, Intel recommends using the MegaWizard Plug-In Manager to specify legal parameter values for megafunctions.