ID:14135 COMPENSATE_CLOCK parameter for PLL "<name>" has unsupported value <name> for <mode>
CAUSE: The specified PLL has a value for the
COMPENSATE_CLOCK
parameter that is not supported for the specified OPERATION_MODE
parameter or the current PLL_TYPE
parameter setting. The COMPENSATE_CLOCK
parameter supports the following values in the following modes:- The
COMPENSATE_CLOCK
parameter can be set toclk{0,1,2,3,4,5}
,GCLK
, orLCLK
if theOPERATION_MODE
parameter is set toNORMAL
and thePLL_TYPE
parameter is set toENHANCED
. - The
COMPENSATE_CLOCK
parameter can be set toclk{0,1,2,3,4}
,GCLK
,LCLK
orLVDSCLK
if theOPERATION_MODE
parameter is set toNORMAL
and thePLL_TYPE
parameter is set toFAST
. - The
COMPENSATE_CLOCK
parameter can be set toextclk{0,1,2,3}
if theOPERATION_MODE
parameter is set toZERO_DELAY_BUFFER
. - The
COMPENSATE_CLOCK
parameter can be set toextclk0
if theOPERATION_MODE
parameter is set toZERO_DELAY_BUFFER
and theSCAN_CHAIN
parameter is set toSHORT
. - The
COMPENSATE_CLOCK
parameter is not supported if theOPERATION_MODE
parameter is set toEXTERNAL_FEEDBACK
orNO_COMPENSATION
.
ACTION: Locate the source of the message to determine which megafunction parameter is causing the error and specify a legal parameter value for the current mode and PLL type, or change the values of the PLL_TYPE
or OPERATION_MODE
parameters. To avoid receiving this message in the future, Intel recommends using the MegaWizard Plug-In Manager command to specify legal parameter values for megafunctions.