ID:14064 WYSIWYG primitive "<name>" must not use pxor port in non-XOR mode
CAUSE: The specified WYSIWYG primitive uses a pxor
port, but is not in XOR mode (that is, the OPERATION_MODE
parameter is set to something other than XOR
). The pxor
port is not supported for non-XOR modes. Either the pxor
port must not be used, or the OPERATION_MODE
parameter must be set to XOR
.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Intel Technical Support by creating a Service Request at www.altera.com/mysupport.