ID:14052 WYSIWYG flipflop primitive "<name>" cannot use <name> port and power-up low
CAUSE: The specified WYSIWYG flipflop primitive has both an aload
port and a POWER_UP
parameter value set to LOW
. Either the aload
port must be disconnected or the WYSIWYG flipflop primitive's POWER_UP
parameter must be changed to HIGH
.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Intel Technical Support by creating a Service Request at www.altera.com/mysupport.