ID:14104 WYSIWYG primitive "<name>" cannot have RAM_BLOCK_TYPE parameter set to <name> when in read-only operation mode
CAUSE: The specified WYSIWYG primitive has the RAM_BLOCK_TYPE
parameter set to MRAM
, but is in read-only mode (that is, the OPERATION_MODE
parameter is set to ROM
). However, M-RAMs do not support read-only mode. Either the RAM_BLOCK_TYPE
parameter must be set to M4K
or M512
, or the OPERATION_MODE
parameter must be set to a value other than ROM
.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Intel Technical Support by creating a Service Request at www.altera.com/mysupport.