ID:14259 WYSIWYG primitive "<name>" sclr or sload port must be used when in synchronous mode
CAUSE: The specified WYSIWYG primitive is in synchronous mode (that is, the SYNCH_MODE
parameter is set to ON
), but does not use the sclr
port or the sload
port. The sclr
port or sload
port must be used if the SYNCH_MODE
parameter is set to ON
.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Intel Technical Support by creating a Service Request at www.altera.com/mysupport.